稻麦联合收获机分段式脱粒装置设计与优化

针对纵轴流联合收获机在收获稻麦时出现的脱粒不彻底、分离不完全等问题,该研究设计了一种分段式纵轴流脱粒分离装置。该装置主要由锥形脱粒滚筒、脱粒强度可调式凹板筛、360°分离式凹板筛、作业参数电控调节系统等构成。通过单因素试验,分别获得了脱粒强度可调式凹板筛的开关板针对小麦和水稻脱粒的最佳开关状态。为寻求装置作业参数对脱粒效果的影响规律及最优参数组合,进行了多目标优化试验。以滚筒转速、导流板角度、凹板筛脱粒间隙、凹板筛分离间隙及喂入量作为影响因素,以破碎率、损失率、脱出物含杂率为试验指标,建立了破碎率、损失率、脱出物含杂率的数学模型。试验结果表明:各因素对破碎率影响的显著性大小顺序为滚筒转速、凹板筛脱粒间隙、导流板角度、喂入量、凹板筛分离间隙;对脱出物含杂率影响的显著性大小顺序为滚筒转速、导流板角度、凹板筛脱粒间隙、喂入量、凹板筛分离间隙;对损失率影响的显著性大小顺序为滚筒转速、导流板角度、凹板筛脱粒间隙、喂入量、凹板筛分离间隙。通过多目标参数优化分析,确定装置进行小麦脱粒的最优作业参数组合为脱粒滚筒转速905 r/min、导流板角度69°、凹板筛脱粒间隙18 mm、凹板筛分离间隙19 mm、喂入量4 kg/s。在该参数组合条件下进行了田间验证试验,结果表明,与常规纵轴流脱粒装置相比,整机作业破碎率由1.46%降为1.00%,含杂率由1.85%降为1.43%,损失率由1.72%降为1.20%,各指标实测值与模型优化值的相对误差均小于5%,满足国家相关标准要求。该装置有效解决了破碎率高、脱粒不干净、分离不彻底的问题,研究结果可为纵轴流联合收获机脱粒装置的结构改进和作业参数优化提供参考和依据。     

基于DTW距离的拖拉机传动轴载荷样本长度计算方法

针对工程领域载荷样本长度确定方法对农业机械载荷适用性较差的问题,提出了一种基于动态时间扭曲(DTW,Dynamic Time Warping)距离计算载荷样本长度的方法。首先,运用无线扭矩传感器获取犁耕作业下拖拉机传动轴的动态载荷,结合传动轴犁耕作业下的载荷特点,划分作业工况;再将作业循环叠加并经过归一化处理后进行DTW距离计算,确定传动轴载荷样本长度;最后,计算参数外推中均值混合正态分布函数的拟合参数相对误差。结果表明,运用DTW距离方法确定的载荷样本长度,能够使均值双正态分布函数拟合得到的参数相对误差保证在10%以内。近似均值精度估计法和均值曲线拟合法的拟合参数相对误差最大值分别为126.06%和80.62%,而基于DTW距离计算方法的拟合参数相对误差最大值为5.43%,验证了基于DTW距离的载荷样本长度计算方法的适用性。研究结果可为拖拉机传动轴田间试验载荷样本长度确定提供参考。     

氧化石墨烯和五价砷在改性多孔介质中的共迁移特征

砷是农田土壤重金属污染的主要元素之一,在砷污染农田土壤的修复过程中往往忽视纳米颗粒能够使结合态的砷重新释放,导致有效态砷浓度升高,探究土壤中黏土矿物对氧化石墨烯(Graphene Oxide,GO)和五价砷(As(V))在多孔介质中迁移行为的影响,对进一步完善农田土壤砷修复理论以及提高农作物产量、保护人体健康具有重要意义。该研究利用蒙脱石和高岭石改性石英砂,通过砂柱迁移试验系统地研究了GO、As(V)和GO-As(V)在填加0%、10%、30%和50%的蒙脱石和高岭石改性石英砂柱中的迁移行为。研究结果表明,随着高岭石和蒙脱石改性石英砂填加比例的增加,GO和As(V)的迁移能力均呈降低趋势,且GO和As(V)在不同条件下的迁移曲线均存在显著差异(P0.05);GO在50%高岭石和蒙脱石改性石英砂柱中的回收率相对于石英砂柱分别下降了14%和17%,As(V)分别下降了15%和12%;在共迁移试验中,GO和As(V)在石英砂柱中回收率分别上升至99%和100%。分析表明,As(V)在蒙脱石改性石英砂柱中的迁移能力大于高岭石改性石英砂,而GO与之相反;当GO和与As(V)共迁移时,二者在介质中的迁移能力均大于其单独迁移。本研究表明GO、As(V)释放到土壤后,能够加速As(V)的迁移,造成土壤砷污染的扩大化。     

农产品储运环境实时监测系统设计

农产品运输车辆和储存仓库的内部温湿度等环境和位置参数是农产品物流调度管理的重要依据，综合使用物联网、无线传感器网络、GPRS无线通信、GSM短信、GPS、GIS等技术与方法，构建一个一体化的农产品储运环境的远程实时监测系统。     

品种及初生重对仔猪死亡率和21日龄个体重的影响

试验对2 319头仔猪的初生重与21日龄个体重和死亡率进行分析。结果表明:大约克仔猪哺乳期死亡率最低,21日龄体重最高;随着初生重的增加,仔猪死亡率降低,21日龄个体重增加。     

遵义县白菜不同配方施肥效果初探

为指导农户生产,进行了6个不同施肥量比较试验.结果表明：白菜施肥量为清粪水1500kg/667m2,尿素20kg/667m2,普钙50kg/667m2,氯化钾13kg/667m2,单产高,经济效益好,可在遵义县推广.     

Influence of synergism caused by organic montmorillonite and nanometer calcium carbonate on mechanical properties and crystallization of polyamide 1010-based composites

This account showed that nanometer-active calcium carbonate (CaCO₃) improved polyamide 1010/organic montmorillonite (OMMT) composites and OMMT boosted polyamide 1010/CaCO₃. The mechanical performance suggested the composites to be reinforced through adsorption forces present between the nanofillers and the matrix. The synergistic effect of CaCO₃ and OMMT increased the yields and shrunk cavities when observed by scanning electron microscopy. The obvious resulting synergism was verified by X-ray scattering techniques after the addition of OMMT. The concentration of CaCO₃ did not change lamellar-size or influence the crystal growth. The effect of CaCO₃ on melting behavior was found less significant than that exert on crystallization behavior.     

The grafting of recycled polyol from waste polyurethane foam onto new polyurethane and its impact on shape recovery and water vapor permeation

Recycled polyols from waste polyurethane (PU) foams were grafted onto PU to improve the properties such as tensile strength, shape recovery, low-temperature flexibility, and water compatibility. The recycled polyol was either purified by column chromatography before grafting or was used directly for grafting. The soft segment melting temperature of PU did not notably increase with the addition of polyol, whereas the glass transition temperature increased with increased polyol content. The tensile strength sharply increased at low polyol content and decreased at high polyol content, while the strain at break did not significantly change with an increase in polyol content. The shape recovery at 10 oC notably improved compared with unmodified PU and remained high after four cyclic tests. Polyol-grafted PU demonstrated better lowtemperature flexibility and reduced the water vapor permeability of PU membranes. Overall, grafting recycled polyol onto PU significantly improved the tensile stress, shape recovery, and low-temperature flexibility of PU.     

黑果枸杞LrDREB1基因克隆及其在非生物胁迫下的表达分析

DREB(Dehydrate responsive element binding factor)转录因子是植物非生物逆境适应中的关键调节因子,该类转录因子具有保守的AP2/EREBP结构域,在低温、高盐等非生物逆境胁迫下,可调控下游逆境应答基因的表达,对增强植物的抗逆能力有重要作用。黑果枸杞具有极强的耐干旱、盐碱能力,为研究黑果枸杞DREB类基因在低温、盐碱响应中的功能,本研究以强抗盐灌木黑果枸杞总RNA为模板,基于前期转录组测序拼接序列,利用RT-PCR方法克隆得到一条DREB基因。该基因含有一个1116 bp的开放阅读框,编码372个氨基酸。系统进化树分析显示,Lr DREB1基因属于DREB亚家族A2组成员,与拟南芥AtDREB2B、AtDREB2E具有较高的相似性。荧光定量PCR结果显示,Lr DREB1受盐胁迫、ABA胁迫和低温胁迫诱导表达,可能参与依赖ABA的信号转导途径,调节黑果枸杞抗盐响应。本研究通过对黑果枸杞LrDREB1基因的克隆、序列分析和表达分析,为研究Lr DREB1的功能及黑果枸杞抗盐机理提供了帮助。     

Isolation and Characterization of GhLEA3 Gene from Upland Cotton and Its Expression in Response to Low Temperature Stress

[Objective] Based on the analysis of cotton GhLEA3 gene structure and its expression model in chilling stress, we investigated the resistance function of GhLEA3 in response to cold stress. [Method] We cloned GhLEA3 from upland cotton by homologous sequence cloning way. We analyzed the properties of the GhLEA3, and constructed phylogenetic tree by bioinformatics analysis. We constructed the transient expression vector 35S∷GhLEA3-GFP by In-Fusion connection technology and studied the subcellular localization of GhLEA3. The expression of GhLEA3 gene in leaves of TM-1 at three-leaf stage under low temperature stress treatments (4 ℃, 24 h) was performed. Agrobacterium tumefaciens mediated floral dipping method was used to transform the gene with expression vector 35S∷GhLEA3-GFP into Arabidopsis thaliana wild type. Low temperature germination experiment at 4 ℃ was conducted to verify germination ability of the transgenic Arabidopsis thaliana T₃ seed. The transgenic Arabidopsis seedlings were treated at 4 ℃(low temperature), and all the leaves were taken to measure their electrical conductivity. [Result] The coding sequence of GhLEA3 gene is 1 218 bp, which encodes 405 amino acids. GhLEA3 protein includes 4 functional domains of PF02987. Phylogenetic analysis showed that the similarity of amino acid sequences between upland cotton GhLEA3 and Arabidopsis thaliana AtLEA3 was 52.6%. GhLEA3 might be mainly localized in vacuoles and small vesicles. GhLEA3 was up-regulated in leaves after low temperature treatment. The germination rate of transgenic Arabidopsis thaliana of T₃ generation at low temperature was significantly higher than that of wild type, and its electrical conductivity of leaves after low temperature treatment was significantly lower than that of wild type. [Conclusion] GhLEA3 belonged to the member of LEA3 family. Phylogenetic analysis showed that GhLEA3 had the closest relationship with AtLEA3. GhLEA3 was induced by low temperature stress and may play an important role in improving cold resistance.